Philips Hue
Appear Outdoor Wall Light
Colour-changing light for a front door, porch or exterior wall, wired straight into your mains supply with no separate power pack to run.
$259.95 inc GST In stock at supplier · dispatches in 3 business days
1
Comes with free shipping Ordered in from our supplier. Allow about 3 business days before it dispatches.
30-day returns Unopened items in their original packaging
2-year warranty Backed by Philips Hue
Everything you need to know
A mains-powered outdoor wall light that throws bi-directional beams up and down the wall for full white and colour ambiance. It rates IP44 against splashing rain, spans 2000–6500K plus 16 million colours, and connects over Zigbee and Bluetooth. Add the Hue Bridge to unlock schedules, automations and control from anywhere.
Product features
No transformer to hide
The Appear wires straight into 220–240 V mains, so there is no low-voltage power supply to buy or find a spot for. That makes it a clean swap for an existing wall light. Leave the hard-wiring to a licensed electrician.
Full white and colour
White and colour ambiance gives you the whole 2000–6500K white range for everyday light and 16 million colours when you want the facade to read differently. Two light sources throw bi-directional beams up and down the wall, up to 1180 lumens at 4000K.
Built for a wet wall
An IP44 rating protects the Appear against rain and splashing from any direction, so it holds up on an exposed or covered wall through an Australian summer downpour. It pairs over Zigbee and Bluetooth; add the Hue Bridge for schedules and sunset automations.
The Philips Hue system
Hue is a system, not just a smart bulb. Every Hue product, from bulbs and lamps to light strips and fixtures, joins the same Zigbee mesh and shows up in one app. A single bulb bought today slots straight into a whole-home setup later.
The lights
Bulbs, lamps, strips & fixtures
All speak Zigbee and mesh with each other, so every light you add extends the network's reach.
The hub
One Bridge runs the whole home
Runs up to 50 lights off your router, and connects Apple Home, Google Home, Alexa and SmartThings.
The control
App, voice & switches
One app for rooms, scenes and schedules, plus dimmers, buttons and sensors that work without a phone.
Getting started
1
Start with one light Start here
Add your first Hue light, open the Hue app, and control up to 10 lights in one room over Bluetooth. No hub required.
2
Add the Hue Bridge When you're ready
Run up to 50 lights, control them from anywhere, set schedules and automations, and connect your voice assistant.
Start small, scale up. Everything you buy today keeps working when you add the Bridge, and everything Hue has made since 2012 still joins the same system.
Works with
Also works with
-
Works with Apple Home
-
Works with Google Home
-
Works with Amazon Alexa
-
Works with SmartThings
-
Works with Home Assistant
Works with Matter
This wall light also works with Matter, so it connects to any Matter-compatible platform or controller, not just the ones above.
Connects over
Phone to wall light, through a hub
Your phone reaches the hub over your home network; the hub speaks Zigbee to the wall light, and adds scenes, automations and out-of-home control.
-
Zigbee
Set up over Bluetooth
Used once, to get it onto your Wi-Fi.
-
Bluetooth
Works offline
Runs on your home network. Only remote access needs the internet.
Specifications & Installation
No specifications match.
Output
- Brightness
- 1180 lumens
- Colour rendering (CRI)
- 80
- Rated lifespan
- 25,000 hrs
- Light type
- Colour
- Colour temperature
- 2000–6500 K
- Colour system
- RGBW
- Dimmable
- Yes
- Power draw (in use)
- 8 W
- IP rating
- IP44
- Placement
- Outdoor
- Dimensions
- 84 × 240 × 117 mm
- Power
- Hardwired
- Light direction
- Up & down
- Finish
- Black
Complete your Philips Hue setup
Your wall light is the starting point. The pieces below turn it into a system, with whole-home control, hands-free lighting and switching from the wall.
Add hands-free lighting
Outdoor Motion Sensor
A motion sensor turns the lights on as you walk in and off when the room empties, so no one reaches for a switch. Set brighter days and dim nights.
$109.95
Keep control on the wall
Dimmer Switch
A dimmer or switch on the wall lets anyone adjust the lights without a phone, and recall a scene with one press. Good by the door or the bed.
$39.95
Keep control on the wall
Smart Button
A dimmer or switch on the wall lets anyone adjust the lights without a phone, and recall a scene with one press. Good by the door or the bed.
$49.95
Keep control on the wall
Tap Dial Switch
A dimmer or switch on the wall lets anyone adjust the lights without a phone, and recall a scene with one press. Good by the door or the bed.
$79.95
Common questions
Quick answers before you buy. We test this gear ourselves. Can't find yours? Ask our Melbourne team
Yes. It carries an IP44 rating, which protects it against rain and splashing from any direction. That suits an exposed or covered exterior wall. It is not rated for direct high-pressure hosing.
Both. It is White and colour ambiance: the full 2000–6500K white range plus 16 million colours, all set from the Hue app or a scene.
No. The Appear wires straight into 220–240 V mains, so there is no low-voltage transformer to buy. Hard-wiring should be done by a licensed electrician.
Not to switch it on. Over Bluetooth you can control it in range from your phone. The Hue Bridge adds schedules, automations, sunset triggers and control while you are away from home.
Philips Hue · Appear Outdoor Wall Light