Sensibo logo mark

Setup & remote Sensibo troubleshooting

Sensibo can't detect your air conditioner remote

Auto Detect says it couldn't detect the remote, or the signal count never moves. Usually it's flat batteries or the remote aimed away from the Sensibo, and you can always pick the remote by hand.

Checked

  • Sky
  • Air
  • Air Pro

Start here

What are you seeing?

Pick the closest match and we'll point you to the fix most likely to sort it.

Why it happens

The Sensibo controls your air conditioner by copying its infrared remote. During setup, Auto Detect listens for one press of the remote's power button and works out which remote it is. Sensibo says this works for 99% of air conditioner remotes.

When it fails, the Sensibo almost always just didn't hear the remote clearly: the batteries are low, or the remote was aimed at the air conditioner instead of the Sensibo's front face. If there's no remote at all, you can still pick it by hand.

If Auto Detect finished but the air conditioner then ignores some commands, that's a different problem: see the guide to an air conditioner that doesn't respond to Sensibo.

Before you start

Auto Detect runs after the Sensibo has joined your Wi-Fi. If setup stopped before that, start with the Wi-Fi guide.

Quick checks first

Run these checks before moving on to the fixes.

Checklist 0 of 2 checked
Check the Sensibo is on and connected

Sensibo says the device should be powered on and connected before you pair the remote. The app shows it as connected on the home screen.

Check the remote works the air conditioner

Turn the unit on and off with its own remote. If that doesn't work, the remote is the problem, not the Sensibo.

Fixes, most likely first

Work down the list and stop when it's fixed.

  1. The remote's batteries are flat

    How to tell. The remote is unreliable with the air conditioner itself, or its display is faint.
    • Fit fresh batteries

      Sensibo asks for a working remote with fresh batteries before you pair. Swap them even if the remote still sort of works.

    • Run Auto Detect again

      In the Sensibo app, open the device, tap the settings cog, then Change remote type, and tap Auto Detect.

  2. The remote isn't pointed at the Sensibo

    How to tell. The remote works the air conditioner fine, but the app still counts no signals.
    • Point the remote at the front of the Sensibo

      Hold the remote close to the Sensibo, aimed at its front face, and press the power button once when the app asks.

    • Tap Try again

      If the app says it couldn't detect the remote, move closer and tap Try again.

    • Wait for Remote detected successfully

      When the app finds the remote, it says Remote detected successfully. Tap Done, then test every function before you leave it.

  3. There's no remote to detect

    How to tell. The remote is lost or broken, so there's nothing to press.
    • Choose manual setup

      On the Remote setup screen, tap Manual setup instead of Auto Detect.

    • Pick your brand from the list

      Under Alternative method, tap Select, then choose your air conditioner's brand from the dropdown.

    • Test each configuration

      The app lists several remote configurations for your brand. Tap test beside each one until the air conditioner responds. Sensibo warns this takes longer and is easier to get wrong than Auto Detect.

    • Test every function

      Check on and off, temperature, each mode, fan speeds and swing before you settle on a configuration.

  4. The air conditioner doesn't take an infrared remote

    How to tell. The unit has never had a handheld remote, only a controller on the wall.
    • Check for an infrared remote

      Sensibo works with window, portable, split, high wall, cassette and central air conditioners, as long as the unit can be controlled with an infrared remote. Without one, the Sensibo has no signal to copy.

    • Check Sensibo's compatibility list

      Sensibo's compatibility checker lists air conditioner brands and remote models. The list isn't complete, so a missing model doesn't mean it won't work.

    • Ask Sensibo support

      For a specific model you're unsure of, Sensibo's support team can confirm compatibility.

Frequently asked questions

Almost certainly, if it came with an infrared remote. Sensibo supports over 10,000 air conditioner models, and the Sky, Air and Air Pro all have the same compatibility.

Yes. Pick your brand by hand on the remote setup screen and test each configuration until one works. It takes longer than Auto Detect.

Open the device in the Sensibo app, tap the settings cog and tap Change remote type.

That's a near match rather than a failed detection. Pick a similar remote variant under Change remote type and test it.

Still need a hand?

We answer most messages within one business day. If your question is about an existing order, have your order number ready. It speeds things up.

Contact us