Home Assistant Sensibo troubleshooting
Sensibo shows in Home Assistant but you can't control it
The Sensibo appears in Home Assistant but has no modes to pick, or a sensor is missing. Usually the remote was never set up in the Sensibo app, or the entity is hidden.
- Sky
- Air
- Air Pro
Start here
What are you seeing?
Pick the closest match and we'll point you to the fix most likely to sort it.
Why it happens
Home Assistant gets everything about your Sensibo from the Sensibo cloud, including which modes your air conditioner has. Those modes come from the remote you set up in the Sensibo app.
If no remote was ever set up, the device still appears in Home Assistant, but there are no modes to pick. Separately, Home Assistant turns some Sensibo entities off by default, so a missing sensor is often just hidden.
Quick checks first
Run these checks before moving on to the fixes.
Make sure you can control the air conditioner from the Sensibo app itself. If the app can't, fix that first.
Open the Sensibo's climate card in Home Assistant and tap Mode. If Off is the only choice, start with the first fix.
Fixes, most likely first
Work down the list and stop when it's fixed.
- Most likely for you
No remote is set up for the device
How to tell. The climate entity has no modes, and the log says the device is not correctly registered with remote on Sensibo cloud.- Set up the remote in the Sensibo app
In the Sensibo app, tap Set up remote on the device's card, or go to Device Settings and tap Change Remote Type. Tap Auto Detect, then point your air conditioner's remote at the Sensibo and press its power button. If auto-detect doesn't find it, pick your brand by hand.
- Give Home Assistant a minute
Home Assistant checks Sensibo once a minute, so the modes come through shortly after the Sensibo cloud has a remote for the device. The mode list then shows every mode the remote offers.
Did this fix it? - Set up the remote in the Sensibo app
- Most likely for you
The entity is turned off by default
How to tell. The device works, but an entity listed in Home Assistant's Sensibo docs isn't on the device page.- Show the disabled entities
Open the Sensibo device in Home Assistant. Under its entities, open the hidden or disabled ones and turn on the one you want.
Did this fix it? - Show the disabled entities
- Most likely for you
Your model doesn't have that reading
How to tell. The missing entity is an air quality reading, and your device is a Sky or Air.- Check what your model measures
Sensibo lists air quality monitoring on the Air Pro. The Sky and Air report temperature and humidity.
Did this fix it? - Check what your model measures
Frequently asked questions
Related problems
Still need a hand?
We answer most messages within one business day. If your question is about an existing order, have your order number ready. It speeds things up.
Contact us