Sensibo logo mark

Connection Sensibo troubleshooting

Sensibo won't connect to Wi-Fi

Setup stalls at the Wi-Fi step, or a Sensibo that used to work has dropped off. Most of the time it's the network band, the password or the distance to the router.

Checked

  • Sky
  • Air
  • Air Pro

Start here

What are you seeing?

Pick the closest match and we'll point you to the fix most likely to sort it.

Why it happens

The Sensibo connects to your home Wi-Fi, then to Sensibo's servers, and the app talks to it through those servers. If it can't get onto your network, the app can't reach it.

It only joins 2.4 GHz networks. Many routers now combine 2.4 GHz and 5 GHz under one name, which can trip up setup. The rest of the time it's a password the Sensibo won't accept, a network that changed since setup, or a spot too far from the router.

Quick checks first

Run these checks before moving on to the fixes.

Checklist 0 of 2 checked
Restart the Sensibo

Unplug it, wait 10 seconds and plug it back in. The light should start blinking. If it doesn't, try a different power adapter or USB cable.

Read the light

The number of blinks tells you which step it's stuck on. One blink is setup mode, two is joining your router, three is reaching Sensibo's servers. In the app, tap Help on the device's card for a guide to each pattern.

Fixes, most likely first

Work down the list and stop when it's fixed.

  1. Your network is 5 GHz only, or both bands share one name

    How to tell. Setup fails at the Wi-Fi step and your router broadcasts one network name for both 2.4 GHz and 5 GHz.
    • Pick the 2.4 GHz network

      If your router has separate names for each band, choose the 2.4 GHz one in the Sensibo app.

    • Turn off 5 GHz during setup

      If both bands share one name, turn the 5 GHz band off in your router's settings while you set up the Sensibo, then turn it back on.

  2. The Wi-Fi password isn't being accepted

    How to tell. The light blinks twice every two seconds and never moves on to three.
    • Check the password

      The password is case sensitive. Type it again carefully.

    • Watch for special characters

      Sensibo says the Wi-Fi password can't contain special characters and has a 32-character limit.

    • Check the security type

      Sensibo recommends WPA2. It doesn't work with WEP.

  3. Your network changed

    How to tell. The Sensibo used to work, and since then you've changed the Wi-Fi password, renamed the network or reset the router.
    • Run setup again

      Put the Sensibo back in setup mode (one blink every two seconds) and connect it to the network again from the app. To force setup mode, push a paperclip into the small hole on the side of the Sensibo while it has power and hold for 5 seconds.

  4. The Wi-Fi signal is too weak where the Sensibo is

    How to tell. It connects close to the router but drops out in its final spot.
    • Set it up close to the router

      Sensibo suggests being within about 3 to 4.5 metres of the router during setup. Move it to its final spot once it's connected.

    • Check the signal in that spot

      Stand where the Sensibo goes and look at your phone's Wi-Fi bars. If they're low, a Wi-Fi extender helps.

    • Keep it clear of metal

      Keep the Sensibo away from metal objects and thick walls between it and the router.

  5. The app can't finish setup

    How to tell. The Wi-Fi details are right, but the app setup fails every time.
    • Put it in setup mode

      With the Sensibo powered, push a paperclip into the small hole on its side and hold for 5 seconds. The light then blinks once every few seconds.

    • Join the Sensibo's own network

      On your phone or computer, open Wi-Fi settings and join the network named Sensibo followed by four characters.

    • Open the setup page

      In a browser, go to 192.168.4.1. Tap Configure WiFi, pick your network, enter the password and tap Save.

    • If the page shows Profiles instead

      Go to Profiles and enter your network name, security type (WPA2 or WPA), password and a profile priority of 0. Tap Add, then unplug the Sensibo and plug it back in.

    • Wait for the single glow

      When it connects, the light glows once and turns off, and your phone drops off the Sensibo network. Rejoin your normal Wi-Fi.

On your device

Sensibo Sky Smart AC Controller Sensibo Sky
  • A different setup page address

    In the manual setup, the Sky's page is at 192.168.1.1, not 192.168.4.1.

Sensibo Sky Smart AC Controller

Frequently asked questions

No. Sensibo devices only join 2.4 GHz networks.

Yes. Sensibo suggests connecting to a mobile hotspot to rule out a fault with the device. If it connects there, the problem is your home network.

Still need a hand?

We answer most messages within one business day. If your question is about an existing order, have your order number ready. It speeds things up.

Contact us