Connection Sensibo troubleshooting
What the blinking light on your Sensibo means
The light on a Sensibo Sky, Air or Air Pro counts its way through setup. The number of blinks tells you which step it's stuck on and what to fix.
- Sky
- Air
- Air Pro
Start here
What are you seeing?
Pick the closest match and we'll point you to the fix most likely to sort it.
Why it happens
When a Sensibo powers up, its light counts its way through setup: setup mode, then joining your Wi-Fi, then reaching Sensibo's servers. Once it's connected, the light glows once and goes dark.
If it stops on one pattern, that number tells you where it's stuck. This applies to the Sky, Air and Air Pro. Sensibo Pure and Elements use different lights.
Quick checks first
Run these checks before moving on to the fixes.
Watch for a few cycles before you count. The pattern repeats every two seconds.
Fixes, most likely first
Work down the list and stop when it's fixed.
- Most likely for you
It's in setup mode
How to tell. One blink every two seconds.- Run setup in the app
Open the Sensibo app and follow the setup steps. The app asks for your Wi-Fi network and password.
Did this fix it? - Run setup in the app
- Most likely for you
It can't join your Wi-Fi
How to tell. Two blinks every two seconds, and it doesn't move on to three.- Check the password
Make sure you entered the right Wi-Fi password. It's case sensitive.
- Use 2.4 GHz
Sensibo doesn't support 5 GHz networks. Pick the 2.4 GHz network, or turn 5 GHz off during setup if both share one name.
- Move it closer to the router
Set it up near the router, then move it once it's connected.
Did this fix it? - Check the password
- Most likely for you
It's on your Wi-Fi but can't reach Sensibo
How to tell. Three blinks every two seconds.- Check the internet
Make sure other devices on the same network can get online.
- Check your router's DNS and firewall
The Sensibo needs working DNS from your router and secure web traffic (port 443) to reach Sensibo's servers. If your router or internet provider filters traffic, that can block it.
Did this fix it? - Check the internet
- Most likely for you
It's connecting to Sensibo, or updating
How to tell. Four blinks every two seconds. On the Sky, this is a firmware update.- Give it a few minutes
This step normally passes on its own. Leave the Sensibo powered.
- Check the ports if it's stuck
If it's still at four blinks after a few minutes, check that ports 80 and 443 are open to sensibo.com and that no firewall is blocking it.
Did this fix it? - Give it a few minutes
- Most likely for you
It lost its connection after setup
How to tell. The light is off, but the app shows the device as offline.- Restart it and read the blinks
Unplug the Sensibo, wait 10 seconds and plug it back in. The blinks then show which step it gets stuck on.
- No light at all after a restart
If it doesn't light up when you plug it back in, check the power supply and cable.
Did this fix it? - Restart it and read the blinks
- Most likely for you
A steady light
How to tell. The light stays on and never turns off.- Contact Sensibo support
Sensibo says this isn't a normal pattern and asks you to contact their support team.
Did this fix it? - Contact Sensibo support
Frequently asked questions
Related problems
Still need a hand?
We answer most messages within one business day. If your question is about an existing order, have your order number ready. It speeds things up.
Contact us