A60 - E27 640 Smart Bulb
The Edison-screw version of WiZ's filament globe. Amber glass and visible filaments, with the whole white range behind them and no bridge to buy.
Everything you need to know
The Filament A60 E27 is WiZ's decorative globe in Edison screw. Amber glass, exposed LED filaments, and tunable white light from 2000K candlelight to 5000K daylight behind them. It joins your home Wi-Fi on its own, renders colour at CRI 90 or better, and works with Alexa, Google Home and SmartThings out of the box, plus Apple Home through a Matter controller.
Product features
The screw-cap version
Edison screw, so it goes into the pendants, floor lamps and table lamps that take an E27. It's the same globe as the B22 bayonet version in every other respect, 2mm longer at 106mm, so pick the cap your fitting actually takes rather than the one you like the look of.
Decorative without the compromise
Decorative bulbs usually trade light quality for looks. This one doesn't, which matters most in the open fittings an amber globe tends to end up in.
Candlelight up to daylight
The amber glass stays the same, the light behind it doesn't. Wind it down to 2000K for a long dinner, or up to 5000K when you need to see properly. Set it by hand in the app, or put it on a schedule and let it move through the day on its own.
Straight onto your Wi-Fi
There's no hub, gateway or bridge to buy first, so one globe is a complete starting point rather than the second thing you have to buy.
Made to be seen
Clear amber glass means the filaments are visible whether the light is on or off, which is the point in an open pendant. It also means more glare than a frosted globe, and at 640 lumens it's warmer and dimmer than the 806-lumen frosted A60. Choose it for the look and the atmosphere, not for lighting a whole room.
The WiZ system
WiZ is a full smart-lighting system that skips the hub. Every bulb, strip and fixture joins your home Wi-Fi directly and shows up in one app, so you can start with a single bulb and add colour, whites and control across the house whenever you like. No bridge, ever.
Bulbs, strips, bars & fixtures
Full colour and tunable white across bulbs, strips, light bars and downlights, plus vintage filament shapes. All join the same WiZ app.
Straight onto your Wi-Fi
Every light connects to your router directly. No hub or bridge to buy, and a typical home network runs well over a hundred lights.
App, voice, switches & SpaceSense
Run it from the WiZ app or your voice assistant, add WiZ switches and remotes, or let SpaceSense switch lights on as you walk in, no sensor needed.
Add your first WiZ light Start here
Screw in a bulb, open the WiZ app, and it joins your Wi-Fi in about a minute. Full colour and tunable white, controlled from your phone. No hub required.
Add lights, controls and scenes Grow anytime
Add more lights room by room, set schedules and Rhythms, and pair a switch, remote or SpaceSense motion. It all lives in the one app, with no bridge to buy.
Start with one bulb and grow at your own pace. Every WiZ light joins the same Wi-Fi and the same app, so there's nothing to replace as you add more.
Works with
-
Works with Apple Home
-
Pairs with Google Home
-
Pairs with Amazon Alexa
-
Works with SmartThings
-
Works with Home Assistant
Works with Matter
This bulb also works with Matter, so it connects to any Matter-compatible platform or controller, not just the ones above.
Joins your home network; control from the app, no hub or bridge needed.
-
Wi-Fi
Used once, to get it onto your Wi-Fi.
-
Bluetooth
Works offline
Runs on your home network. Only remote access needs the internet.
Specifications
No specifications match.
- Brightness
- 640 lumens
- Colour rendering (CRI)
- 90
- Rated lifespan
- 15,000 hrs
- Light type
- Warm to Cool White
- Colour temperature
- 2000–5000 K
- Dimmable
- Yes
- Power draw (in use)
- 7 W
- Power draw (standby)
- 0.5 W
- Placement
- Indoor
- Dimensions
- 60 × 106 mm
- Fitting
- E27
- Shape
- Filament