Portable Button
Two buttons for your WiZ lights: press for on and off, hold to dim. Magnetic, so it sticks to the wall plate or the fridge and comes straight off again.
Everything you need to know
The Portable Button is WiZ's simplest control. Two keys give you four actions, and it talks straight to your WiZ lights rather than through the router, so it keeps working when the Wi-Fi doesn't. It runs on two AAA batteries, needs no hub, and is set up in the WiZ app. It controls WiZ lights only.
Product features
Four things, and nothing to learn
The top key turns your lights on, the bottom one turns them off. Hold either for more than a second and it brightens or dims instead. That's the whole interface, which is the point: nothing to get wrong reaching for it in the dark.
It doesn't use your router
It sends commands straight to the lights rather than joining your network, so an internet dropout or a router reboot doesn't stop it working. Around 15 metres indoors through normal walls, and it doesn't need to be aimed at anything. The lights still need power, of course.
There's a magnet in the back
Stick the adhesive plate up where a switch should have gone and the button holds itself there, or put it straight onto anything metal. Lift it off and it's a remote for the arm of the couch. No wiring, no electrician, and nothing to undo later.
You choose what it controls
Out of the box it controls every WiZ light in one room, which suits most people. If you'd rather it did something narrower or wider, the app lets you pick exactly which lights answer to it.
An accessory, not a universal button
Worth being clear about the scope before you buy.
The WiZ system
WiZ is a full smart-lighting system that skips the hub. Every bulb, strip and fixture joins your home Wi-Fi directly and shows up in one app, so you can start with a single bulb and add colour, whites and control across the house whenever you like. No bridge, ever.
Bulbs, strips, bars & fixtures
Full colour and tunable white across bulbs, strips, light bars and downlights, plus vintage filament shapes. All join the same WiZ app.
Straight onto your Wi-Fi
Every light connects to your router directly. No hub or bridge to buy, and a typical home network runs well over a hundred lights.
App, voice, switches & SpaceSense
Run it from the WiZ app or your voice assistant, add WiZ switches and remotes, or let SpaceSense switch lights on as you walk in, no sensor needed.
Add your first WiZ light Start here
Screw in a bulb, open the WiZ app, and it joins your Wi-Fi in about a minute. Full colour and tunable white, controlled from your phone. No hub required.
Add lights, controls and scenes Grow anytime
Add more lights room by room, set schedules and Rhythms, and pair a switch, remote or SpaceSense motion. It all lives in the one app, with no bridge to buy.
Start with one bulb and grow at your own pace. Every WiZ light joins the same Wi-Fi and the same app, so there's nothing to replace as you add more.
Works with
Joins your home network; control from the app, no hub or bridge needed.
-
Wi-Fi
Used once, to get it onto your Wi-Fi.
-
Bluetooth
Works offline
Runs on your home network. Only remote access needs the internet.
Specifications
No specifications match.
- Type
- Remote
- Finish
- White
- Mounting
- Wall-mountedMagneticFreestanding
- Power
- Battery
- Battery
- AAA
- Buttons
- 2 buttons
- Controls
- On/offDimming