A60 - B22 640 Smart Bulb
Edison looks, with the whole white range behind the glass. An amber filament globe that runs straight off your Wi-Fi, no bridge needed.
Everything you need to know
The Filament A60 B22 is WiZ's decorative globe: amber glass, visible LED filaments, and tunable white light behind them. It joins your home Wi-Fi on its own, so there's nothing else to buy, and it works with Alexa, Google Home and SmartThings out of the box, plus Apple Home through a Matter hub.
Product features
One globe, morning to midnight
The amber glass stays the same, but the light behind it doesn't. Wind it down to 2000K for a candlelit dinner, or take it up to 5000K when you actually need to see what you're doing. Set it by hand in the app, or put it on a schedule and let it move through the day on its own.
Straight onto your Wi-Fi
There's no hub, gateway or bridge to buy first. The globe joins your existing 2.4GHz Wi-Fi network directly, which means one bulb is a complete starting point rather than the second thing you have to buy. Add it to Matter through a hub you already own and Apple Home picks it up too.
Decorative without the compromise
Decorative bulbs usually trade light quality for looks. This one renders colour at CRI 90 or better, well above the CRI 80 most connected bulbs settle for, so timber, paint and skin tones read properly under it. It draws 7W to do the work of a 50W globe and is rated for 15,000 hours.
The WiZ system
WiZ is a full smart-lighting system that skips the hub. Every bulb, strip and fixture joins your home Wi-Fi directly and shows up in one app, so you can start with a single bulb and add colour, whites and control across the house whenever you like. No bridge, ever.
Bulbs, strips, bars & fixtures
Full colour and tunable white across bulbs, strips, light bars and downlights, plus vintage filament shapes. All join the same WiZ app.
Straight onto your Wi-Fi
Every light connects to your router directly. No hub or bridge to buy, and a typical home network runs well over a hundred lights.
App, voice, switches & SpaceSense
Run it from the WiZ app or your voice assistant, add WiZ switches and remotes, or let SpaceSense switch lights on as you walk in, no sensor needed.
Add your first WiZ light Start here
Screw in a bulb, open the WiZ app, and it joins your Wi-Fi in about a minute. Full colour and tunable white, controlled from your phone. No hub required.
Add lights, controls and scenes Grow anytime
Add more lights room by room, set schedules and Rhythms, and pair a switch, remote or SpaceSense motion. It all lives in the one app, with no bridge to buy.
Start with one bulb and grow at your own pace. Every WiZ light joins the same Wi-Fi and the same app, so there's nothing to replace as you add more.
Works with
-
Works with Apple Home
-
Pairs with Google Home
-
Pairs with Amazon Alexa
-
Works with SmartThings
-
Works with Home Assistant
Works with Matter
This bulb also works with Matter, so it connects to any Matter-compatible platform or controller, not just the ones above.
Joins your home network; control from the app, no hub or bridge needed.
-
Wi-Fi
Used once, to get it onto your Wi-Fi.
-
Bluetooth
Works offline
Runs on your home network. Only remote access needs the internet.
Specifications
No specifications match.
- Brightness
- 640 lumens
- Colour rendering (CRI)
- 90
- Rated lifespan
- 15,000 hrs
- Light type
- Warm to Cool White
- Colour temperature
- 2000–5000 K
- Dimmable
- Yes
- Power draw (in use)
- 7 W
- Power draw (standby)
- 0.5 W
- Placement
- Indoor
- Dimensions
- 60 × 104 mm
- Fitting
- B22
- Shape
- Filament