Setup Ecosystems
Where to mount your Sensibo
Where to put a Sensibo so your air conditioner hears it every time, how to test the spot before you stick it down, and what changes its temperature readings.
A Sensibo talks to your air conditioner the same way the remote does, with infrared light. Where you put it decides whether every command lands, so it's worth five minutes of testing before you stick it to the wall.
What the spot needs
- The same room as the indoor unit. Infrared doesn't go through walls, so a Sensibo in the hallway can't run the bedroom unit.
- A clear line of sight, with no curtains, shelves or pot plants in the way.
- Within 6 metres, which is Sensibo's stated range. Closer is more reliable.
- The black glossy front facing the air conditioner. That's where the signal comes out.
- A powerpoint the USB power adapter's cable can reach.
A spot on the wall opposite the indoor unit, or on a bedside table or shelf facing it, usually ticks all five.
Think about the temperature reading too
The Sensibo has its own temperature and humidity sensors, and it reads the air where it sits. Climate React and the app's room readings use those numbers. A spot in direct sun, right next to a window or in the air conditioner's airflow will read differently from where you actually sit, and Climate React will act on the wrong number.
If the best spot for the signal is a poor spot for the reading, the Air and Air Pro work with Sensibo's Room Sensor, which adds temperature, humidity and motion readings from another part of the room.
Test the spot before you stick it down
- Hold it where you plan to mount it
With the Sensibo set up in the app, hold it in the spot you've picked, glossy front towards the indoor unit.
- Send a few commands
Tap Turn on in the app, then turn it off, change the temperature and change the mode. Watch that the unit responds to every one.
- Use a power bank if the cable won't reach
Sensibo suggests a standard phone power bank for positioning tests, so you can try spots away from a powerpoint before you run a cable.
- Move closer if it misses
If the air conditioner ignores some commands, move the Sensibo closer. Sensibo suggests about 1 metre. Holding it right next to the unit tells you whether distance is the problem at all.
- Stick it down
Clean the surface, apply the adhesive strip from the mounting kit in the box and press the Sensibo into place, still facing the unit.
Set it up near the router, then move it
During setup the Sensibo joins your 2.4 GHz Wi-Fi, and Sensibo suggests keeping it close to the router while it does. Once it's connected, move it to its spot by the air conditioner. If it drops off Wi-Fi in its final spot but works near the router, the signal is the problem, not the Sensibo. Our guide to why a Sensibo won't connect to Wi-Fi works through it.
If the air conditioner still ignores it
When you've moved it closer and the unit still misses commands, or responds but not the way you asked, the remote the Sensibo learned during setup may not quite match your air conditioner. Our guide to an air conditioner that doesn't respond to Sensibo covers picking a closer remote variant.
Frequently asked questions
How far away can a Sensibo be from the air conditioner?
Up to 6 metres, with a clear line of sight. If the air conditioner doesn't respond reliably, Sensibo suggests moving it to about 1 metre away.
Does the Sensibo have to face the air conditioner?
Yes. The black glossy part of the Sensibo is where the infrared signal comes out, so it should face the indoor unit.
Can I put a Sensibo in a different room from the air conditioner?
No. It sends infrared, like the remote, and infrared doesn't pass through walls. It needs a clear line of sight to the indoor unit.
How do I mount a Sensibo on the wall?
Clean the spot, then stick it on with the adhesive strip from the mounting kit in the box. Test the position first, because moving it after the strip is on is harder.
Does the Sensibo need to be near a powerpoint?
Yes. It runs from a USB power adapter plugged into a powerpoint, so plan the spot around where the cable can reach.
Still need a hand?
We answer most messages within one business day. If your question is about an existing order, have your order number ready. It speeds things up.
Contact us