App & sync Sensibo troubleshooting
Sensibo Climate React or a schedule didn't run
Climate React did nothing, or a schedule skipped a day. Usually the feature is off, Change AC state isn't ticked, or the schedule was set to run once.
- Sky
- Air
- Air Pro
Start here
What are you seeing?
Pick the closest match and we'll point you to the fix most likely to sort it.
Why it happens
Climate React and schedules both send your air conditioner the setting you chose when the time, or the room, says so. Climate React checks the temperature and humidity every 90 seconds and acts when one crosses your threshold. A schedule acts at a set time, once or on the days you pick.
When one doesn't run, the setting behind it is usually the cause rather than a fault: Climate React is switched off, Change AC state was left unticked, or the schedule only ever had one run in it. If the air conditioner also ignores commands you send by hand, the automation is fine and the signal isn't getting through.
Quick checks first
Run these checks before moving on to the fixes.
Turn the air conditioner on and off from the app. If it doesn't respond to that either, the automation isn't the problem. Start with the guide to an air conditioner that doesn't respond to Sensibo.
Climate React checks the temperature and humidity every 90 seconds, so it can take a minute or so to act after the room changes.
Fixes, most likely first
Work down the list and stop when it's fixed.
- Most likely for you
Climate React is switched off
How to tell. The small Climate React icon on the device screen is grey instead of blue.- Find the Climate React icon
Open the device in the Sensibo app. The small Climate React icon sits on the main control screen. Blue means on, grey means off.
- Tap it to turn Climate React on
Tap the grey icon once and check it turns blue. Then wait 90 seconds for the next check.
Did this fix it? - Find the Climate React icon
- Most likely for you
Change AC state isn't ticked
How to tell. The rule or schedule is saved and switched on, but the air conditioner never changes when it runs.- Open the rule or schedule
For Climate React, tap Climate React in the device's feature menu. For a schedule, tap Schedule and open the one that didn't run.
- Tick Change AC state
Make sure Change AC state is ticked, then tap AC state and choose what the air conditioner should do.
- Tap Save
Changes don't apply until you tap Save at the bottom of the editor.
Did this fix it? - Open the rule or schedule
- Most likely for you
The schedule has no days picked
How to tell. It ran once, within a day of when you made it, and hasn't run since.- Open the schedule
Open your room in the Sensibo app, tap Schedule and open the schedule.
- Pick the days under Repeat on
Tap each day you want it to run. With no days picked, Sensibo runs the schedule once at the chosen time within the next 24 hours. Tap Save.
Did this fix it? - Open the schedule
- Most likely for you
There's no schedule to turn it off
How to tell. You have one schedule set to On, and nothing set to Off.- Add a second schedule
On the Schedules list, tap the plus button to make a new schedule.
- Set its AC state to Off
Set the time and days, tick Change AC state, set AC state to Off and tap Save. Sensibo's own example is an On schedule at 08:00 and an Off schedule at 18:00.
Did this fix it? - Add a second schedule
- Most likely for you
The on and off points are too close together
How to tell. The air conditioner switches on and off more often than you'd expect, as the room hovers around your settings.- Open Climate React
Tap Climate React in the device's feature menu.
- Widen the gap
Sensibo recommends leaving a gap between the turn on and turn off points. Its summer example cools above 24.5°C and drops to Fan below 22°C. Tap Save.
Did this fix it? - Open Climate React
- Most likely for you
Auto Off isn't switched on
How to tell. You expected Auto Off to switch the air conditioner off after a set time, and it kept running.- Check you have the Energy Saver Plan
Auto Off carries a small plus sign in the app, which marks it as part of Sensibo's Energy Saver Plan. Without the plan, it doesn't run.
- Open Auto Off
On the device screen, tap Auto Off. The tile reads Disabled while it's off.
- Turn on Enable Auto Off and set the time
Tap Enable Auto Off, then pick how long the air conditioner can run before Sensibo switches it off.
- Check the Sensibo is online
Sensibo says the device must be connected to the internet for Auto Off to work.
Did this fix it? - Check you have the Energy Saver Plan
Frequently asked questions
Related problems
Still need a hand?
We answer most messages within one business day. If your question is about an existing order, have your order number ready. It speeds things up.
Contact us