Setup Ecosystems
How to add a Sensibo to the app
Every screen of adding a Sensibo Air, Air PRO or Sky to the Sensibo app, from scanning the QR code to pairing your air conditioner's remote.
Adding a Sensibo takes a few minutes and happens entirely in the Sensibo app. The app walks you through it, but a few screens ask for things you'll want ready, so here's every step, in order, as it looks on the phone. If you haven't picked a Sensibo yet, start with our Sensibo starter guide.
Before you start
- The Sensibo app installed on your phone, and an account
- Your Wi-Fi name and password. The network must be 2.4 GHz
- Your air conditioner's remote, with working batteries
- The Sensibo near your router for setup, if you can. You can move it once it's connected
Add your Sensibo
- Tap Add device
Open the Sensibo app and sign in. On a new account, tap Add device. If you already have a Sensibo, open the menu and tap Add a new device.
- Choose your model
Tap your Sensibo in the list. The Air and Air PRO share one entry.
- Plug it in
Plug the Sensibo into power near the air conditioner. When its light blinks once, tap Next.
- Find the QR code
The QR code is on a sticker on the back of the Sensibo. Tap Next.
- Scan the code
Tap Tap to scan and hold your phone's camera over the QR code. If the camera won't read it, tap Enter code manually and type the code from the sticker.
- Add a location
Tap Add a new location. A location is your home. The app uses it for geofencing, which acts when you arrive or leave.
- Name it
Give the location a name, such as Home, then tap the pencil next to Address.
- Set the address
Search for your address and tap it in the bar at the bottom of the map.
- Check and continue
Check the name and address, then tap Next. The app then asks for a room: pick one or tap Add a new room, name it after the room the air conditioner is in, and tap Next.
- Let it find your Wi-Fi
The app finds the Sensibo over Bluetooth and lists the Wi-Fi networks it can see. Pick a 2.4 GHz network and enter its password.
- Wait for it to connect
The Sensibo joins your Wi-Fi and checks for a firmware update. This takes a minute or two.
- Finished
When it says Finished Successfully, tap Next.
- Set up the remote
Get your air conditioner's remote and tap Auto Detect.
- Press power on the remote
Point the remote at the front of the Sensibo and press its power button once.
- If it misses
If the app says it couldn't detect the remote, fit fresh batteries, move closer and tap Try again.
- Remote found
When it says Remote detected successfully, tap Done.
- Skip the Room Sensor
The app offers to set up a Room Sensor. If you don't have one, tap Skip.
- Finish setup
Tap Finish Setup.
- Check it on the home screen
Your room now shows on the home screen with its temperature and humidity, and a switch for the air conditioner.
Once it's added
Test the basics before you rely on it: turn the air conditioner on and off from the app, change the temperature, and try each mode and fan speed. If some settings don't work, the remote it picked is close but not quite right. Our Sensibo troubleshooting guides cover that, and Wi-Fi setup that won't finish.
From there you can set schedules and Climate React in the app, or add it to Home Assistant.
Frequently asked questions
Where is the QR code on a Sensibo?
On a sticker on the back of the device. If the camera won't read it, the app lets you type the code in instead.
Why won't my Sensibo connect to Wi-Fi?
Most often the network is 5 GHz only, or the password was mistyped. The Sensibo needs a 2.4 GHz network, and Sensibo suggests setting it up close to the router.
Do I need the air conditioner's remote to set up a Sensibo?
Yes, for the quickest setup. Auto Detect learns your remote from one press of its power button. Without it, you pick your brand by hand and test each remote configuration.
Can I add more than one Sensibo?
Yes. Open the menu and tap Add a new device. Each Sensibo controls one air conditioner, so give each its own room.
Still need a hand?
We answer most messages within one business day. If your question is about an existing order, have your order number ready. It speeds things up.
Contact us