Everything Shelly announced at IFA 2026

Shelly's first camera. Full HD over Wi-Fi and Bluetooth, with motion alerts and a preview of what triggered them in the Shelly app. Cloud AI object recognition reports whether it saw a person, a vehicle or a pet rather than just reporting movement, and you can draw detection zones to watch specific areas.

Recording to a microSD card is free, and the card is not included. Shelly's cloud runs inside the EU and encrypts footage at rest, but it needs a Shelly Premium subscription at €3.99 a month for one camera, with three months included, and the AI object recognition sits behind the same subscription. Exclusion zones and a password-protected privacy mode are built in. At €39.90 the camera itself is cheap enough to buy in pairs.

A 4 inch touchscreen with a quad-core processor, Wi-Fi 6, Bluetooth 5.0, proximity and gesture sensors, a replaceable 100 to 240 V power base, USB-C and an integrated relay. It handles lighting, heating and cooling, scenes and connected devices, and reports live consumption from Shelly PM devices.

Native Home Assistant integration is the reason to look at it. You build the dashboard in Home Assistant and run it on the wall, rather than accepting the screen layout the vendor shipped.

The radiator thermostat gets a new motor for quieter valve movement and battery life of up to two years, but the firmware is the real change. A compatible Shelly Wi-Fi device from the Plus generation onwards, connected to Shelly Cloud, can now act as the gateway.

That takes a dedicated box off the shopping list, which Shelly says was a common request. The Gateway Gen3 still works for cloud and local control if you already own one. The device supports both Bluetooth and Zigbee.

A motion sensor carrying both Bluetooth and Zigbee, so you pick the protocol rather than the sensor picking it for you.

It is also the shape of the whole BLU range from here. Shelly says the combined Bluetooth and Zigbee models will replace the Bluetooth-only BLU series over time, in response to demand for Zigbee.

A single-channel relay that switches lighting without a neutral wire at the switch, which is the case in plenty of older installs. The two-channel 2L Gen4 does the same job for two circuits.

Both sit on the Gen4 platform, so they carry Wi-Fi, Bluetooth, Zigbee and Matter. Shelly has not yet published which Gen4 models ThreadLink will run on.