Shelly scripts

// Holiday lights: switches a light on and off at a different time each evening, so
// the house looks lived in while you're away. Runs on any Gen2 or newer Shelly relay or dimmer.

let CONFIG = {
  onFrom: "18:30",

// Blown globe alert: learns what a light circuit normally draws at each brightness and
// messages your phone through ntfy when the draw drops, as it does when a globe fails.
// Needs a Shelly dimmer or relay that measures power.

let CONFIG = {

// Daily run limit: adds up how long a relay has been on since midnight and switches
// it off for the rest of the day once your allowance is used. Needs a Shelly relay.

let CONFIG = {
  maxHours: 4,

// Frost alert: checks the overnight forecast each evening and tells your phone
// through ntfy when it's going to be cold enough for frost. Uses the free Open-Meteo forecast.

let CONFIG = {
  latitude: -37.81,

// Energy budget alert: tells your phone through ntfy when today's use passes a
// warning level and again at your daily limit. Needs a Shelly energy meter.

let CONFIG = {
  dailyKwh: 12,

// Public IP change alert: checks your home's public IP address and tells your phone
// through ntfy when it changes. Runs on any Gen2 or newer Shelly.

let CONFIG = {
  ntfyTopic: "",

// Mains voltage alert: tells your phone through ntfy when the supply voltage stays
// outside the Australian range, and again when it's back. Needs a Shelly energy meter.

let CONFIG = {
  highVolts: 253,

// Power outage report: when the power comes back, sends your phone a message through
// ntfy saying how long it was off. Runs on any Gen2 or newer Shelly on mains power.

let CONFIG = {
  ntfyTopic: "",

// Pool pump by the forecast: runs the pump longer on hot days and shorter on mild
// ones, from a start time you choose. Uses the free Open-Meteo forecast, with no account.

let CONFIG = {
  latitude: -37.81,

// Peak demand tracker: measures your home's demand in each half-hour of your
// tariff's demand window and tells your phone through ntfy each day's peak. Needs a Shelly energy meter.

let CONFIG = {
  fromTime: "15:00",

// Standby power report: finds the lowest power your home draws overnight and tells
// your phone through ntfy what that always-on load costs a year. Needs a Shelly energy meter.

let CONFIG = {
  fromTime: "01:00",

// Hue wall switch: a switch on a Shelly input controls a Philips Hue room
// through the Hue Bridge on your Wi-Fi. No Home Assistant, no cloud.

let CONFIG = {
  bridgeIp: "192.168.1.20",

// Garage door auto-close: closes the door when it has been open too long.
// Needs a reed switch on an Add-on input to know when the door is shut.

let CONFIG = {
  autoCloseMin: 10,

// Rain-aware watering: runs the garden valve on your days, and skips the run
// when it has rained or rain is on the way. Uses the free Open-Meteo forecast.

let CONFIG = {
  latitude: -37.81,

// Off-peak load control: runs the relay in cheap-rate windows only.
// A flick of a switch on the input starts or cancels a one-off boost.

let CONFIG = {
  window1: "22:00-07:00",

// Load shedding: switches one appliance off when the meter shows too much draw,
// and back on when there's room. Runs on the meter, switches a relay over Wi-Fi.

let CONFIG = {
  limitWatts: 3200,

// Offline alert: checks your other Shelly devices and sends a phone notification
// through ntfy when one stops answering, and again when it's back.

let CONFIG = {
  devices: "192.168.1.40 Garage door, 192.168.1.41 Hot water",

// Electricity cost tracker: adds up what your power costs on a time-of-use tariff.
// Needs a Shelly energy meter (EM Mini Gen4, EM Gen3 or Pro EM-50).

let CONFIG = {
  peakRate: 45.0,

// Internet watchdog: restarts the modem when the internet drops.
// Runs on the Shelly itself. No cloud account needed.

let CONFIG = {
  checkUrl: "http://connectivitycheck.gstatic.com/generate_204",